Try#2 Good bed adhesion. Poor surface quality - will raise nozzle temp another 5°C.
Small top fin printed poorly. Support appears to have been wobbly. Increase size of support.
Poor surface quality. 240@100 on 0.25mm nozzle? Try again +5°C
100% sizing. Worked as expected. Seperated easily from raft. Some roughness. Prop pins pressure fit snugly.
Printed with HIPS.
S3D's initial temp of 245 seemed to be too high with sagging on small parts. Adjusted in print to 235 with improvements in surface quality.